1. The condition for maximum power transfer is that the load resistance must be equal to
|
2. The ninth shell of an atom is capable of containing ??????. electrons. |
3. For three phase ac rectification how many diodes are required? |
4. The shells of an atom represent various energy levels |
5. As a switch that is ON the transistor operates in the?????region |
6. In removing ac ripples with a capacitor, it must be connected in parallel with the load |
7. A diode behaves like a non-return valve. |
8. A p-type material joined to an n-type material forms an electronic component called |
9. Three phase rectification provides smoother output than single phase? |
10. A semiconductor doped to have electrons as majority charge carriers is ???(material). |
11. For proper transistor action, the base-emitter junction must be forward biased, and the collector-emitter junction must be reverse biased for a common emitter configuration. |
12. As a switch that is OFF the transistor operates in the??????????region. |
13. Zener diodes are designed to operate in |
14. Boron is an acceptor element. |
15. Which of the following can be used for voltage stabilization?
|
16. The emitter current is the sum of base current and collector current. |
17. About???? volts is required to overcome the potential barrier is silicon diode. |
18. In full wave rectification with a center-tap transformer, how many diodes are required? |
19. During partial conduction in a semiconductor ?????? move relative to electrons. |
20. About ???? volts is required to overcome the potential barrier is germanium diode. |
21. In a transistor the collector junction is more heavily doped than the emitter junction |
22. A semiconductor in its pure state is said to be |
23. The static current gain of a transistor is given by |
24. Apart from a capacitor,??. can also be used remove ac ripples. |
25. The purpose of using a capacitor (usually ceramic) in a power supply is for
|
26. A semiconductor doped to have holes as majority charge carriers is a ???(material). |
27. ??is responsible for partial conduction in semiconductor. |
28. The process of removing ac ripples from a rectified ac power is called |
29. The static output resistance of a transistor is given by |
30. The static input resistance of a transistor is given by |
31. As a switch the transistor operates in how many regions? |
32. The optimum point on a transistor load line is called the |
33. One purpose of using a capacity (usually electrolytic) in a power supply is for |
34. The electric field produced due to recombination of holes and electrons at a p-n junction creates the
|
35. Phosphorous is a donor element. |
36. Doping is the process of introducing????.into a semiconductor material. |
37. In an n-p-n transistor action, all the electrons from the emitter do not recombine with hole at the base. |
38. As an amplifier, a transistor operates in the??????????????? region |
39. Materials whose electrical properties lie between those of conductors and insulators are known as |
40. In conductors, the valence and conduction bands overlap |