1. As an amplifier, a transistor operates in the??????????????? region |
2. Materials whose electrical properties lie between those of conductors and insulators are known as |
3. The process of removing ac ripples from a rectified ac power is called |
4. Apart from a capacitor,??. can also be used remove ac ripples. |
5. Which of the following can be used for voltage stabilization?
|
6. In full wave rectification with a center-tap transformer, how many diodes are required? |
7. The optimum point on a transistor load line is called the |
8. A semiconductor in its pure state is said to be |
9. The shells of an atom represent various energy levels |
10. The emitter current is the sum of base current and collector current. |
11. Phosphorous is a donor element. |
12. In a transistor the collector junction is more heavily doped than the emitter junction |
13. As a switch that is ON the transistor operates in the?????region |
14. As a switch that is OFF the transistor operates in the??????????region. |
15. A diode behaves like a non-return valve. |
16. Doping is the process of introducing????.into a semiconductor material. |
17. As a switch the transistor operates in how many regions? |
18. In conductors, the valence and conduction bands overlap |
19. The static output resistance of a transistor is given by |
20. Boron is an acceptor element. |
21. In an n-p-n transistor action, all the electrons from the emitter do not recombine with hole at the base. |
22. For proper transistor action, the base-emitter junction must be forward biased, and the collector-emitter junction must be reverse biased for a common emitter configuration. |
23. In removing ac ripples with a capacitor, it must be connected in parallel with the load |
24. About ???? volts is required to overcome the potential barrier is germanium diode. |
25. The static input resistance of a transistor is given by |
26. A p-type material joined to an n-type material forms an electronic component called |
27. ??is responsible for partial conduction in semiconductor. |
28. The static current gain of a transistor is given by |
29. One purpose of using a capacity (usually electrolytic) in a power supply is for |
30. A semiconductor doped to have electrons as majority charge carriers is ???(material). |
31. A semiconductor doped to have holes as majority charge carriers is a ???(material). |
32. The electric field produced due to recombination of holes and electrons at a p-n junction creates the
|
33. The ninth shell of an atom is capable of containing ??????. electrons. |
34. During partial conduction in a semiconductor ?????? move relative to electrons. |
35. The condition for maximum power transfer is that the load resistance must be equal to
|
36. For three phase ac rectification how many diodes are required? |
37. Three phase rectification provides smoother output than single phase? |
38. About???? volts is required to overcome the potential barrier is silicon diode. |
39. Zener diodes are designed to operate in |
40. The purpose of using a capacitor (usually ceramic) in a power supply is for |